Please note: This tool is based on Swedish laws and regulations. Rules differ between countries, so always check what applies where you live and travel. You are responsible for checking the rules that apply to you.

Home / Free campervan and motorhome tools / Motorhome fault codes: look up an OBD code
Camperliv.se

Motorhome fault codes: look up an OBD code

Enter up to three codes. You can separate them with a comma or a space.

Next steps: Motorhome mechanical faults: AdBlue, EGR, DPF · Fiat Ducato: common faults (in Swedish)

This is general information about typical faults and symptoms on motorhomes, converted vans and common base vehicles. It does not replace a fault-code reading on your particular vehicle, the manufacturer’s instructions or an assessment in a workshop. The same code can have several causes and mean different things in different engines and model years. Do not drive on if the engine warning light is flashing, if the engine is in limp mode, or if a start inhibit is active — go to a workshop. Camperliv and the writer accept no responsibility for actions you take on the basis of the guides or the tool. Also read the disclaimer.

Frequently asked questions

How do I look up a fault code in the motorhome?

Enter the code in the field, for example P2002. You can enter several codes, separated by commas. The tool shows a short explanation, common causes and when you should go to a workshop. The same code can mean different things in different engines and model years, so this is not a diagnosis of your particular vehicle.

Can I use the result as a diagnosis?

No. The result is general information about typical causes. It does not replace a check of your particular motorhome or converted van, the manufacturer’s instructions or an assessment in a workshop.

When should I go to a workshop?

Go to a workshop if the engine warning light is flashing, if the engine is in limp mode, if a start inhibit is active, or if you are unsure of the cause. Do not drive on in those cases. A light that stays on steadily should also be followed up, especially before a longer trip.

What do I do if I get several fault codes at the same time?

Enter all the codes in the field. Some combinations point more often to a shared cause than to several separate faults. The tool then shows that combination at the top, together with the causes that are most likely.

Why is there no explanation for my code?

Some codes are manufacturer-specific, and the meaning then depends on the make and model. Other codes are not yet in the database. In both cases you should go to a workshop if the light is on, if the engine behaves abnormally, or if you cannot judge how serious it is.

Do I have to look up the code before I go to a workshop?

No. A reading can give a first direction, but you do not need to wait to go to a workshop if the engine warning light is flashing, if the engine is in limp mode, or if a start inhibit is active. Do take the codes with you to the workshop if you have already read them.