Please note: This calculator is based on Swedish laws and regulations. Rules differ between countries, so always check what applies where you live and travel. You are responsible for checking the rules that apply to you.
DC-DC charge time calculator
The DC-DC charge-time calculator shows how long you need to drive to charge the leisure battery with a B2B (battery-to-battery) charger from the vehicle’s alternator. Enter the battery size, how charged it is and the charger current.
This calculator requires JavaScript. Turn on JavaScript in your browser to see the results.
1. Battery and charger
2. Results
Read the guide: B2B chargers and smart alternators
Good to know: The calculator is for guidance only. Values marked as assumptions are our estimates and can be changed to your own. Always follow the manufacturer’s instructions. See also the disclaimer.
Next steps: B2B charger and smart alternator · Planning a 12 V electrical system
How the calculator works
Ampere-hours to add = capacity × (target − current charge). 100 Ah from 30 to 100 per cent becomes 70 Ah.
Driving time = Ah to add / (charge current − consumption while driving) / efficiency. Efficiency is an assumption, 95 per cent for lithium and 85 per cent for AGM, and you can change it.
AGM above 80 per cent. A lead-acid battery does not accept full current as it approaches full. As an assumption, the calculator therefore uses 40 per cent of at most 0.1 C for the last part. That puts the result on the high side.
The charger current only applies when the engine is running and the alternator can deliver. Always check the charger’s and the battery’s manuals for the maximum charge current.
Frequently asked questions about charging on the move
How long does it take to charge the battery with a B2B charger?
Divide the number of ampere-hours to be added by the charge current and the efficiency. A 100 Ah lithium battery from 30 to 100 per cent with a 30 A charger takes about 70 Ah / (30 A × 0.95), so roughly 2.5 hours of driving.
Why does AGM take longer than lithium?
An AGM battery does not accept full current as it approaches full. The charge current falls during the absorption phase, so the last few per cent take a long time. The calculator therefore uses a lower current above 80 per cent, as an assumption.
Can the vehicle’s alternator handle a large B2B charger?
It depends on the alternator and the vehicle’s electrical system. Check the vehicle’s and the charger’s instructions before you choose a high-current charger.
Read more
- B2B chargers and smart alternators
- Lithium or AGM
- The cable size calculator for the charger cables