Please note: This guide is based on Swedish laws and regulations. Rules differ between countries, so always check what applies where you live and travel. You are responsible for checking the rules that apply to you.
Campervan build guides
These guides are for converting a panel van into a campervan in Sweden. Start with Campervan conversion: build order and checks, the overview of the order of work and what you need to decide before you start, including weight and whether the vehicle is to be re-registered under Swedish rules as passenger car class II. If you are fitting LPG (in Sweden: gasol), continue with LPG in a campervan: locker, seals and refill, which covers how the locker should be built, leak testing, and advice from the Swedish Civil Contingencies Agency (MCF).
Guides in this topic

Rust protection on a panel van: drilling holes, risk zones and underbody
How to rust-proof a campervan: risk zones on Ducato, Sprinter and Transit, protecting every drilled hole, product types and how often to re-treat.

Campervan build budget: what the materials list doesn’t cover
What does it cost to build a campervan? Cited price ranges from named sources, plus tools, delivery, inspection, insurance, contingency and a quote log.

Fitting a solar panel on a motorhome: mounts, cable entry and wiring
How to fit solar panels on a motorhome roof: bonded mounts or roof rails, a sealed cable entry, series or parallel, MPPT controller and fuses.

Motorhome fridge: compressor or absorption?
Motorhome fridges compared: compressor vs absorption. Power use, LPG, 12 V and 230 V, ventilation and common faults, based on Dometic and Thetford data.

L1H1, L2H2, L3H2: van sizes explained for campervan builds
What do L1H1, L2H2 and L3H2 mean? How to read van length and height codes, and what they mean for bed, headroom, weight, parking and ferries.

LPG in a campervan: locker, seals and refill
How LPG should be installed in a campervan, including the gas locker, seals, drop vents and how refill systems differ.

Campervan conversion: build order and checks
A working order for a van conversion: insulation, layout, electrics, weight and the checks before you register the vehicle.
Frequently asked questions
What do the campervan build guides cover?
They cover converting a panel van into a campervan in Sweden. The conversion guide is the overview of the order of work and the decisions to make before you start. The LPG guide covers how cylinders should be stored, how you check the system for leaks, and the Swedish advice from MCF.
Where should I start if I want to convert a panel van?
Begin with the conversion overview, and decide the vehicle’s use, the weight and whether it is to be re-registered as a motorhome, before the first hole is cut. If you are fitting LPG, follow the LPG guide and have a qualified person who works with motorhome LPG carry out or check the fixed installation.
Do these guides describe Swedish rules?
Yes. The conversion guide explains how a permanent living interior is typically registered in Sweden as passenger car class II, according to the Swedish Transport Agency. The LPG guide is based on advice from the Swedish Civil Contingencies Agency (MCF, formerly MSB) and notes the European standard EN 1949 for LPG installations in motorhomes and caravans.
When in the build should the 12 V electrics be run?
The conversion guide says to run the electrics while walls and floors are still open, with service access to fuses, the battery and connections. That section is planning, not a design or an approval of the installation.